The Futaba BLS276SV High Voltage Brushless S.Bus2 Helicopter Tail Servo must be used with a gyro that will support a 760μs neutral pulse width frequency.
Features:
Specifications:
NOTE: Do not connect this servo directly to a receiver. Always connect to a gyro.
Includes:
Features:
- Compatible with gyros that will support a 760μs neutral pulse width frequency
- Brushless motor offers incredible holding power and 5X longer life than servos equipped with brushed motors
- SBUS 2 compatible
- Dual ball bearing supported output shaft
- One year limited warranty through Hobby Services beginning at date of purchase
Specifications:
- Neutral Pulse Width: 760us
- Speed:
- @6.0V: 0.055 sec/60°
- @7.4V: 0.050 sec/60°
- Torque:
- @6.0V: 61.12 oz/in (4.4 kg/cm)
- @7.4V: 69.45 oz/in (5.0 kg/cm)
- Dimensions: 1.57 x 0.79 x 1.45" (40 x 20 x 36.8mm)
- Weight: 2.12oz (60g)
- Power Supply: 6.0-7.4V
NOTE: Do not connect this servo directly to a receiver. Always connect to a gyro.
Includes:
- BLS276SV Servo
- 1.8" (45mm) Round Horn,
- 1.5" (39mm) four point Horn,
- 1.2" (32mm) 6-point Horn,
- 3x8mm Servo Horn Screw,
- Four each
- Mounting Screws, Grommets, Eyelets, and Instructions
- Gallery
- Description
The Futaba BLS276SV High Voltage Brushless S.Bus2 Helicopter Tail Servo must be used with a gyro that will support a 760μs neutral pulse width frequency.
Features:
Specifications:
NOTE: Do not connect this servo directly to a receiver. Always connect to a gyro.
Includes:
Features:
- Compatible with gyros that will support a 760μs neutral pulse width frequency
- Brushless motor offers incredible holding power and 5X longer life than servos equipped with brushed motors
- SBUS 2 compatible
- Dual ball bearing supported output shaft
- One year limited warranty through Hobby Services beginning at date of purchase
Specifications:
- Neutral Pulse Width: 760us
- Speed:
- @6.0V: 0.055 sec/60°
- @7.4V: 0.050 sec/60°
- Torque:
- @6.0V: 61.12 oz/in (4.4 kg/cm)
- @7.4V: 69.45 oz/in (5.0 kg/cm)
- Dimensions: 1.57 x 0.79 x 1.45" (40 x 20 x 36.8mm)
- Weight: 2.12oz (60g)
- Power Supply: 6.0-7.4V
NOTE: Do not connect this servo directly to a receiver. Always connect to a gyro.
Includes:
- BLS276SV Servo
- 1.8" (45mm) Round Horn,
- 1.5" (39mm) four point Horn,
- 1.2" (32mm) 6-point Horn,
- 3x8mm Servo Horn Screw,
- Four each
- Mounting Screws, Grommets, Eyelets, and Instructions